Skip to main content

            Vasari Lime Plaster & Paint
FREE SHIPPING IN CONTIGUOUS USA ORDERS. CONTACT US FOR INTERNATIONAL ORDERS. PICKUP POLICY: 24HR NOTICE REQUIRED FOR PICK UP ORDERS.

CARRERA PLASTER Instructions

download PDF here

 

SAFETY FIRST

KEEP OUT OF REACH OF CHILDREN. AVOID EYE CONTACT. SEEK IMMEDIATE MEDICAL ATTENTION IF INGESTED OR EXPOSED TO EYES. AVOID PROLONGED EXPOSURE TO SKIN. WEAR SAFETY GOGGLES AND GLOVES WHEN WORKING WITH PLASTER. WEAR OSHA APPROVED RESPIRATOR WHEN WORKING WITH DRY MIXES OR WHEN SANDING PLASTER. FOR MSDS (MATERIAL SAFETY DATA SHEET), VISIT WWW.VASARIPLASTER.COM

Watch our instructional videos https://vasariplaster.com/pages/videos

GENERAL

Carrera plaster has a thicker / coarser to medium texture with low or matte sheen. It can used on interiors as well as exteriors with in most environments or can be sealed to prevent weathering or staining. It compliments both traditional and modern settings. Carrera can be used on large scale areas replacing paint or can be applied on decorative areas. Carrera is made with lime, powdered marble and crushed limestone. Color combinations and creative styles are unlimited. Vasari plasters are very environmentally friendly, healthy and its qualities will improve with time. Vasari's hypo-allergenic products will breath with your space absorbing moisture, absorb carbon dioxide and naturally prevent mold and mildew growth. It can be used in conjunction with our other products such as Marmorino, Veneziano, Mastercoat or Lime Paint. Carrera should be applied in a minimum of 2 coats. Apply over Vasari Mineral Primer or pre-existing latex paint or primer.

Vasari manufactures unmatched lime based finishes. Our products can be combined and applied in endless styles and textures. Explore vasariplaster.com to find the ideal materials for your project.

COVERAGE

5 gallons: 70-80 square feet per 2 coats

2 gallons: 3-35 square feet per 2 coats

1 quart: 3 square feet per 2 coats

Dry mix (makes 5 gallons): 70-80 square feet per 2 coats

SUITABLE APPLICABLE SURFACES

Apply Carrera over substrates that are clean, cohesive, free of contamination and as follows:

Gypsum Drywall: (Interiors Only) Drywall should be taped and smoothed to a level 4 or higher finish in accordance with Gypsum Association’s GA-214. Use only Mineral Primer or recommended latex or acrylic primers before applying Carrera.

Existing painted substrates: Vasari Carrera will adhere to previously existing painted surfaces as long as they are latex or acrylic (water based). We recommend scuffing the surface for better adhesion and wiping any dust before plaster application. Use Vasari Mineral Primer or recommended latex or acrylic primers before applying Carrera if necessary.

Existing texture: Carrera can be applied onto existing moderate to heavier textures such as orange peel or skip trowel. Apply first coat to cover texture. Minor cracking might occur from excessive thickness, which is acceptable as long as there’s no delamination or peeling.

Preparatory work: Mask and protect adjacent surfaces and remove any dust from surface, especially after sanding. Mask about .5-1mm from adjacent surface or trim to allow for thickness of plaster.

Primer: Vasari Mineral Primer (see ‘Mineral Primer tech data’) or Latex or acrylic primer is required over gypsum board, wood and other substrates with uneven suction or moisture absorption. Allow primer to dry before plaster application.

Exterior application: Carrera can be applied on existing exterior surface such as Vasari Mastercoat, primed conventional cement coatings and pre-existing paint. Mineral Sealer or masonry sealer is required to reduce potential patina or discoloration with direct water contact. Consult technical data sheets for more information regarding exterior application.

Shower / Tadelakt application: Watch video about plastering showers here. Using Carrera, apply directly over Vasari Mastercoat plaster. Use Mineral Sealer and Vasari Wax to seal the plaster. Consult ‘Shower Instructions Technical Data Sheet’ for more information on plastering showers.

APPLICATION

Carrera can be applied in a matte sheen with minor movement and variation, or can be burnished or smoothed to limestone like sheen and texture. It can also be applied with layers of heavier texture if desired.

1st coat: Using a trowel, apply thin to .5mm thick strokes on to surface. First coat can be applied smooth or textured depending on desired look. The plaster can also be rolled or sprayed, and then back troweled. For a smoother finish, after the plaster has dried for 30-60 minutes, it can be flattened with a trowel. Allow at least 24 hours for first coat to completely dry.

2nd coat: Apply multiple thin or textured passes. Apply each pass over the previous only when it has slightly set and is no longer tacky or wet. When the plaster dries to a clay like dryness, after a few minutes, the plaster can then be burnished, or compressed. Keep a wet edge and terminate applications at natural divisions of surface such as control joints or corners.

3rd coat: This is an optional coat for extra smoothness or polish. If the second coat if smooth, multiple paper thin layers can be applied and highly burnished. (or left smooth and unpolished). Conversely, a third coat can achieve more texture if the 1st and 2nd coats are layered in a textured application.

Matte finish: On last the coat, apply multiple thin passes without burnishing or compressing the material. As the plaster dries to a clay consistency, do not burnish the plaster. It’s sometimes a good idea to lightly sand the surface with a soft abrasive material like a sanding sponge or 300 grit+ sand paper for a softer suede like feel.

Top coats: Plaster can be finished with a sealer, wax or numerous decorative finishes depending on the desired look and required durability.

Lime Paint / Lime Wash: Vasari Lime Paint can be applied on top of Carrera for subtle or dramatic decorative color finishes. This should be applied before any sealer.

Colorants: Colors are sold separately and can be chosen from our color chart. Carrera can also be custom tinted to almost any color. Wet mix plasters are sold pre-tinted. It can be tinted with water based or dry pigments. For pure beautiful white, use untinted Carrera. Multiple colors can be applied simultaneously for more creative finishes. Dry mix plasters are sold with tint packets for 5 gallons of plaster.

SHELF LIFE & STORAGE

Do not store in direct sunlight and protect from extreme heat and cold. Store Vasari Plaster products in a cool, dry place. When properly stored, Vasari ‘wet mix’ plaster products’ shelf life is 5 years from purchase date. Vasari ‘dry mix’ plaster products’ shelf is 2 years from purchase date. Wet mixes should be stored with a generous layer of water on the top of the bucket as to not dry out the material. The plaster might slightly thicken over months and years depending on climate conditions and colorant.

DO NOT FREEZE. If frozen, allow up to 48 hours to thaw, thoroughly mix plaster with a drill, and apply.

CARE AND MAINTENANCE

All Vasari products can be cleaned using water in most instances. Solvents such as paint or lacquer thinner and mild detergents can be used to remove stubborn stains. Do not use acidic cleaners or bleach.

Sealers: Sealers are optional depending on water and dirt exposure. Use Vasari Mineral Sealer or masonry sealer for protection against dirt, stains or water patina. Use Vasari Wax for more protection or to achieve a higher luster of sheen. Seal exteriors with Mineral Sealer or masonry sealer to avoid water stains or patina.

DRY MIXES

Carrera is sold in wet or dry mix form. Add plaster to clean water and mix with 1200rpm drill and a 30” paddle mixer until homogeneous paste consistency is reached. Use about 9 quarts of water for every bag of dry mix Carrera. Use warm water if you don’t have a 1200rpm mixer.

Plaster will slightly thicken within a few hours or days to a more workable consistency if mixed too thin. Darker colors will require more tint making the plaster thinner, making thickening time longer.

ADDITIONAL INFORMATION

Flame Spread: ASTM E84, rating of 5; UBC Class I. NFPA Class A. Smoke development 0.

Sound: ASTM 423-07; SAA: 0.09; NRC: 0.10. ASTM 90-04; STC:31

Mold Resistance: 0% mold growth, per test results from procedure ASTM D3273-00

Incompatibility: Salt, chlorides, aluminum, hydrogen fluoride and inter-halogens.

Granulation Size Range: 75-150 µm (microns) / 0.15 -0.20 mm

Ph Factor: 11 Ph

VOC & LEED: 0-VOCs, Up to 8 LEED Point Certified.

Hazardous: No known hazardous waste or by-product. No known hazardous decomposition of product or byproducts are known to have occurred.

Health Hazards: Do not ingest or inhale powdered materials for prolonged periods of time.

Acute gastric or bronchial irritation will result if ingested or inhaled. Consult your physician if condition worsens or if condition is lasting more than 6 hours.

Flash Point: None

Composition: Custom processed aged lime, powdered marble, particles of minerals and other natural elements make up the composition of Carrera. Small percentage organic additives and resins are included to help improve the technical application of the product.

Avoid: Avoid continual contact to the skin and avoid contact with the eyes.

Never add other paints or solvents.

Areas not recommended for Carrera: Inside tubs, sinks, countertops and floors. Avoid salt or chlorine exposure.

Dry Time @ 77 °F (25 °C) @ 50% RH – To touch 24 hours. To re-coat 24 hours.

Dries by evaporation, coalescence

Carrera weights and measures:

WET MIX 5 GALLONS 65 lbs. (28 kg.)

WET MIX 2 GALLONS 30 lbs. (12kg.)

DRY MIX (makes 5 gallons) 45lbs. (21kg.)

1 QUART 3.5 LBS. (1.7kg.)

WARRANTY

Vasari expressly warranties Carrera to be fit for the ordinary purpose for which they are intended for a period of 20 years for non-wet interiors installations, and 10 years for exteriors from date of installation when applied and used in accordance with manufacturer’s instructions within six months of purchase.

WARNING! If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Carefully clean up with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead

For more technical information, application videos, MSDS, ASTM, LEED, creative design ideas and ordering materials visit. Vasari lime plasters and lime paint are among the most authentic and highest quality lime finishes available. WWW.VASARIPLASTER.COM.